Heavy-Duty All-Terrain Offroad Glass Lifting Robot
Versatile 600 kg capacity all-terrain glass lifting robot with synchronised electric control and flexible boom extensions
The KS Robot 600 Offroad is the ultimate heavy-duty glass lifting solution for demanding outdoor construction environments. With a 600 kg load capacity and all-terrain differential front-wheel drive, it masters crushed stone, gravel, grass, wet and slippery floors typical of construction sites. The 900 mm telescopic boom with synchronized electric control ensures smooth, consistent assembly at constant angles without manual readjustment. A special articulated joint enables full electrical tilting from ground-level (approx. 20 cm) to overhead position, allowing direct pickup from work tables and production lines. Optional boom extensions increase reach to 1,800 mm. Powered by a 24V rechargeable battery system with multiple actuators and vacuum suction technology, all movements are controlled by one operator via cable or wireless remote control for maximum efficiency and safety.
Synchronized Electric Control System
All movements controlled electrically via cable or wireless remote with synchronized angle control. 24V battery enables one-person operation with smooth movements.
Modular Boom & Articulation System
SDKG joint enables electrical floor-to-overhead tilting with 170 mm extra reach. Optional boom extensions add 900 mm (1,800 mm total). Electrical turning +/- 45° with 360° manual backup adapts to varied assemblies.
Rugged All-Terrain Construction
All-terrain differential drive masters difficult terrain with gas pressure dampers for shock absorption. 865–970 kg weight with removable counterweights optimizes balance. Flexible axle positioning stabilizes assembly on uneven ground.
Advanced Vacuum & Positioning Technology
Synchronized vacuum control enables floor-to-overhead electrical tilting for direct pickup. Optional fast-coupling allows individual pad disconnection for precise positioning. Flexible independent pad control for precise positioning. Optional electrical turning (+/- 45°) for single-operator control.
SPECIFICATIONS
Load capacity: max. 600 kg
Unit height: approx. 1,530 mm
Unit width: approx. 937 mm
Unit length: approx. 2,550 mm
Dead weight: approx. 865 - 970 kg
Removable counterweights: 12 x 23 kg (standard) or 14 x 23 kg (with SDKG/double telescope)
Power supply: rechargeable battery, 24V
Standard telescopic boom: 900 mm
Electrical boom reach: 900 mm (standard)
Additional outreach with SDKG joint: 170 mm
All-terrain offroad tyres with differential front-wheel drive
High-quality lifting cylinders with gas pressure dampers
Synchronized control unit for constant angle assembly
Flexible axle positioning
Multi-function cable remote control with optional wireless upgrade
Load capacity, dead weight and counterweights vary by equipment configuration
OPTIONS
Special articulated joint (SDKG) — fully electrical floor-to-overhead tilting with 170 mm additional outreach
Electrical boom extension 900mm — extends total reach to 1,800 mm (requires SDKG joint)
Mechanical boom enhancement 900mm — hand-operated alternative boom extension (requires SDKG joint)
Electrical turning unit +/- 45° — powered suction unit rotation with 360° manual backup
Fast coupling for suction pads — individual suction pad disconnection and control
Load hook for KS Robot 600 — versatile alternative to vacuum suction system
Load fork KS Robot 600 — pallet handling capability (max. 600 kg load)
Set of additional slim-wheels (front) — reduces width to approx. 750 mm for narrow doors
LED projector — magnetic socket with battery-powered operation
Wireless remote control with 10 functions — replaces or supplements cable remote
Loading ramp 2.6m x 1.0m — for transport vehicle loading (max. 1,000 kg)
Protection covers for suction pads 360mm
Individual suction pad fast-coupling system
Load capacity: max. 600 kg
Unit height: approx. 1,530 mm
Unit width: approx. 937 mm
Unit length: approx. 2,550 mm
Dead weight: approx. 865 - 970 kg
Removable counterweights: 12 x 23 kg (standard) or 14 x 23 kg (with SDKG/double telescope)
Power supply: rechargeable battery, 24V
Standard telescopic boom: 900 mm
Electrical boom reach: 900 mm (standard)
Additional outreach with SDKG joint: 170 mm
All-terrain offroad tyres with differential front-wheel drive
High-quality lifting cylinders with gas pressure dampers
Synchronized control unit for constant angle assembly
Flexible axle positioning
Multi-function cable remote control with optional wireless upgrade
Load capacity, dead weight and counterweights vary by equipment configuration
Special articulated joint (SDKG) — fully electrical floor-to-overhead tilting with 170 mm additional outreach
Electrical boom extension 900mm — extends total reach to 1,800 mm (requires SDKG joint)
Mechanical boom enhancement 900mm — hand-operated alternative boom extension (requires SDKG joint)
Electrical turning unit +/- 45° — powered suction unit rotation with 360° manual backup
Fast coupling for suction pads — individual suction pad disconnection and control
Load hook for KS Robot 600 — versatile alternative to vacuum suction system
Load fork KS Robot 600 — pallet handling capability (max. 600 kg load)
Set of additional slim-wheels (front) — reduces width to approx. 750 mm for narrow doors
LED projector — magnetic socket with battery-powered operation
Wireless remote control with 10 functions — replaces or supplements cable remote
Loading ramp 2.6m x 1.0m — for transport vehicle loading (max. 1,000 kg)
Protection covers for suction pads 360mm
Individual suction pad fast-coupling system
WHY CHOOSE METALCRAFT
Our products are engineered for durability, safety, and efficiency — trusted by glazing and window experts across New Zealand and around the world.
PROVEN EXPERTISE
With over 30 years in glass, window, and flat-panel handling, our team solves complex challenges with practical, industry-led solutions that improve safety, reliability, and productivity.
Performance engineered
Every product is built in-house using advanced CAD, 3D modelling, and proven manufacturing systems—ensuring precision, durability, and long service life.
skills & Quality
From design to fabrication, our qualified tradespeople and supervisors work with steel, aluminium, and specialised materials to deliver world-class results.
Trusted Worldwide
Proudly New Zealand-made and exported globally, our equipment is recognised for innovation, robustness, and delivering strong return on investment through safer handling and reduced damage.
.jpg)
Let’s Build Something Together
Our process is designed to be easy, efficient, and flexible. No matter how your vehicles are currently being fitted out, we can support you locally or internationally through our trusted network of installers. We’re happy to collaborate directly with your dealer or supplier to deliver the best outcome.